LSD Docs/LSD Docs.iso/FILEZ/lsd37.dms/lsd37.adf/PopulousII.doc.pp/PopulousII.doc

Text File | 1978-01-03 | 14KB | 373 lines

                * i L L i C i T   D o C s   D i V i S i O n *


                 Populous II: The Challenge Games Docs [02]

                            by Baser Evil/iLLiCiT

                    Regards to the best - Rygar & Scooter


WELCOME TO THE CHALLENGE GAMES
=============================================================================
The Populous II: The Challenge Games data disk is really two games in one.


THE CHALLENGE GAMES

The Challenge Games are 42 special worlds that put your strategic expertise
and knowledge of the game to the test.

In the original Populous II, your ultimate goal was always conquest - to help
your people prosper and to destroy their enemies. In the Challenge Games,
your goal is not conquest but survival. Your followers are faced with a
specific threat - tidal waves, burning forests, hurrican winds - and it's
down to you to help them. You must save a certain percentage of your
population in order to win.

Sound easy? There are catches. In each challenge world your arsenal of
miraculous powers is somewhat depleted. In other words, you have only a
limited number of Divine Interventions Commands you can use. Your peoples
survival depends entirely on how creative you are with the few commands at
your disposal.

You are also limited by time. Your time limit varies with each world, but at
best you'll only get a minute or two to save your people. Not only do you
have to be smart, you have to act fast!

                                   - 03 -

The first five challenge worlds are tutorials, designed to introduce you to
the new concept of the Challenge Games. While the tutorials are pretty easy,
you'll find that the 37 worlds that follow become increasingly difficult. Can
you survive as a deity until the very end? Only the fates can fortell.


500 NEW WORLDS

In addition to the Challenge Games, 500 new worlds have created for the data
disk, complete with new "Shogun" graphics and a new Command called Fire Burst.
As in the original Populous II, these worlds can be played randomly or as part
of a Conquest "series".


GETTING STARTED
=============================================================================
To play the Challenge Games, you need an Amiga with a minimum 1 MB of free
memory and a copy of the original Populous II game.

Note: If you're playing the Challenge Games with the 512k version of the
original Populous II, you may encounter problems with sound effects.


LOADING THE CHALLENGE GAMES - FLOPPY DISK USERS
=============================================================================
Before loading, make a copy of your Challenge Games disk. You'll need a
blank, formatted disk. If you want to save games, you'll need an additional
blank, formatted disk.


TO MAKE A COPY OF YOUR CHALLENGE GAMES DISK:

1.  Turn on your Amiga. (Amiga 1000 owners, insert Kickstart 1.2 or 1.3.)

2.  Insert Workbench into drive df0:

3.  If you have a single drive-system, remove Workbench and insert your
    original Challenge Games disk. If you have two drives, simply insert the
    Challenge Games disk into the other drive.

                                   - 04 -


4.  Place the mouse pointer on the Challenge floppy disk icon and left-click
    to highlight it.

5.  Pull down the Workbench menu from them menu bar. Drag the highlighted bar
    down to Duplicate and release. Users with Workbench 2.0 or greater:
    Select the Copy command from the Icon menu.

6.  Depending on your system, you may have to swap disks from time to time.
    Follow the onscreen instructions.

7.  Play only from your copy of the Challenge Games disk. Be sure to leave it
    write-protected!


TO LOAD THE CHALLENGE GAMES
=============================================================================
1.  Turn on your Amiga. (Amiga 1000 owners, insert Kickstart 1.2 or 1.3.)

2.  If you have only 1 MB of memory, remove any memory-hungry peripherals.

3.  If your Amiga is on, turn it off. Insert your copy of the Challenge Games
    disk into drive DF0:.

4.  Turn your computer on.

5.  Double-click on the Challenge floppy disk icon. The disk window appears.

6.  Double-click on the Challenge game icon.

7.  After a moment, you're prompted to insert your original Populous II disk.
    Remove the Challenge Games disk from DF0: and insert your original
    Populous II disk. Click OK.

8.  After a moment, you're prompted to insert your Challenge Games disk.
    Remove the Populous II disk from DF0: and insert your copy of of the
    Challenge Games disk. Click OK.

9.  The game loads and the Game Menu appears.

                                   - 05 -


LOADING THE CHALLENGE GAMES - HARD DISK USERS
=============================================================================
1.  Boot your Amiga as you normally would. (Users with A600 computers and
    only 1 MB of RAM: You must boot with the Challenge Games disk. Insert
    your Challenge Games disk into drive DF0: and turn on your machine.)

2.  Double-click on the Challenge game icon.

4.  After a moment, you're prompted to insert your original Populous II disk.
    Remove any disks from drive DF0: and insert your original Populous II
    disk. Click OK.

5.  The game loads and the Game Menu appears.


PLAYING THE CHALLENGE WORLDS
=============================================================================
To play the Challenge Game, left-click on Challenge Game from the Game Menu.
The Next Conquest screen appears.

                                   - 06 -


THE NEXT CONQUEST SCREEN

When you see the Next Conquest screen, the first thing you should do is
left-click on the Show Level details option. This option provides you with
hints about your people's predicament and the challenge facing you as a
deity.

Next you should note which Divine Intervention Commands are available to you.
Left-click on any options you're unsure about. With the exception of one new
command, all of the commands are identical with those in Populous II. Be
aware that the icons for Place Pala Magnet and Perseus are different, though
their functions remain exactly the same.

                                   - 07 -


Note which special parameters are in effect - for example, it's important to
know whether you can raise or lower land. Also check what percentage of your
population you need to save in order to win the challenge.

When you're ready to start the game, left-click on Proceed.


THE TIME CLOCK

The Time Clock is an element used specifically in the Challenge Games. The
shaded area represents time gone by. It starts at the bottom of the screen
and rotates anti-clockwise until it returns to its starting line - at which
point the game is over.

                                   - 08 -


GAME RESULTS SCREEN

The Game Results screen tells you what percentage of your original population
you needed to save in order to win, and what percentage of your original
population you actually did save.

If you were skilfull enough to win the challenge, this screen tells you the
name of the world where the next challenge will take place. Always write down
the name of the next world in the Challenge series - you'll need it if you
decide to quit the game and play some other time.


FIRE BURST - A NEW DIVINE INTERVENTION!

Fire Burst sends out streams of divine fire out from your Leader. These
streams travel in a wide radius and kill any human populations they hit,
including heroes. The fire will burn both friends and foes alike, so make
sure your leader is nowhere near your own people when using this Command.

To use this command, you must already have made a Leader using the Go To Pala
Magnet Command.

                                   - 09 -


PRESS RETURN FOR FULL SCREEN/NORMAL SCREEN
=============================================================================
In the Challenge Game worlds, you can press Enter (on the keypad) or Return
to go to Full Screen view. To return back to normal view, press Return or
Enter again.


SAVING & LOADING GAMES - FLOPPY USERS
=============================================================================
To save a game, you'll need one blank, formatted disk. Note: You can only
save Conquest and Custom games. You cannot save challenge games.


TO SAVE A GAME TO A FLOPPY DISK:

1.  Left-click on the Game Requester icon. The Game Requester screen appears.

2.  Users with one disk drive: Remove your copy of the Challenge Games from
    DF0: and insert a blank, formatted, write-enabled disk. Users with more
    than one disk drive: Insert a blank, formatted, write-enabled disk into
    your other drive.

3.  Left-click on Save Game. After a moment, the Save Game requester appears.

4.  Left-click on Drawer and type the name of the drive in which you inserted
    the blank disk (DF0:, DF1:, etc.). Press Return.

5.  Left-click on File. Type a name for your saved world and press Return.

6.  Left-click on Save.

7.  Users with one disk drive: Once the game is saved, remove the saved game
    disk from DF0: and insert your copy of the Challenge Games disk. You're
    automatically returned to the Game Requester.

    Users with more than one disk drive: Once the game is saved, you're
    automatically returned to the Game Requester.

                                   - 10 -


TO LOAD A PREVIOUSLY SAVED GAME:

1.  Left-click on the Game Requester icon. The Game Requester screen appears.
    users with one disk drive: Remove yoru copy of the Challenge Games from
    DF0: and insert saved game disk.

2.  left-click on Load Game. After a moment, the Load Game Requester appears.

3.  Left-click on Drawer and type the name of the drive in which you inserted
    the blank disk. (DF0:, DF1:, etc.). Press Return.

4.  Left-click on File. Type the name of your saved world and press return.
    Alternately, you can simply left-click on the file you want to load.

5.  Left-click on Load.

6.  Users with one disk drive: Once the game is loaded, remove the saved game
    disk from DF0: and insert your copy of the Challenge Games disk. You're
    automatically returned to the Game Requester.

    Users with more than one disk drive: Once the game is loaded, you're
    automatically returned to the Game Requester.

                                   - 11 -


SAVING & LOADING GAMES - HARD DRIVE USERS
=============================================================================
Note: You can only save Conquest and Custom games. You cannot save Challenge
games.

TO SAVE A GAME TO YOUR HARD DRIVE:

1.  Left-click on the Game Requester icon. The Game Requester screen appears.

2.  Left-click on Save Game. After a moment, the Save Game requester appears.

3.  If you want to save the game to the directory Populous II is in, proceed
    to step 4.

    If you want to save the game to a different directory, left-click on
    Drawer. Type the name of your hard disk followed by the directory name,
    and then press Return. For example, if your hard drive were called DH0:,
    you'd type DH0: followed by the name of the directory you want to save
    the game to, and then you'd press Return.

4.  Left-click on File. Type a name for your saved world and press Return.

5.  Left-click on Save. You're automatically returned to the Game Requester.


TO LOAD A PREVIOUSLY SAVED GAME:

1.  Left-click on the Game Requester icon. The Game Requester screen appears.

2.  Left-click on Load Game. After a moment, the Load Game Requester appears.

3.  if you saved the game to the directory Populous II is in, proceed to step
    4.

                                   - 12 -


    If you saved the game to a directory other than the one Populous II is
    in, left-click on Drawer. Type the name of yoru hard disk followed by the
    directory name, and then press return. For example, if your hard disk
    were called DH0:, you'd type DH0: followed by the name of the directory
    the saved game is in, and then you'd press Return.

4.  Left-click on File. type the name of your saved world and press return.
    Alternately, you can simply left-click on the file you want to load.

5.  Left-click on Load.


TO SAVE A GAME TO FLOPPY DISK AFTER BOOTING FROM YOUR HARD DRIVE:

1.  Left-click on the Game Requester icon. the Game Requester screen appears.

2.  Left-click on Save Game. After a moment, the Save Game Requester appears.

3.  Left-click on drawer and type the name of the drive in which you inserted
    the blank disk (DF0:, DF1:, etc.). Press Return.

4.  Left-click on File. Type a name for your saved world and press return.

5.  Left-click on Save.

                                   - 13 -

TO LOAD A SAVED GAME FROM A FLOPPY DISK AFTER BOOTING FROM YOUR HARD DRIVE:

1.  Left-click on the Game Requester icon. The Game requester screen appears.

2.  Left-click on Load Game. After a moment, the Load Game Requester appears.

3.  Left-click on Drawer and type the name of the drive in which you inserted
    the blank disk (DF0:, DF!:, etc.). Press Return.

4.  Left-click on File. Type the name of your saved world and press Return.
    Alternately, you can simply left-click on the file you want to load.

5.  Left-click on Load.



Designed & developed by Bullfrog Productions Ltd.


Producer:                          Kevin Shrapnell
Game Testing:                      Scott Probin, Chris Johnson
Product Manager:                   Ann Williams
Documentation:                     David Luoto
Documentation Layout:              Colin Dodson
Quality Assurance:                 Richard Gallagher


Populous is a trademark of Electronic Art.

Amiga is a registered trademark of Commodore-Amiga, Inc.

                                   - 14 -

[END]